<blockquote id="ocekk"><menu id="ocekk"></menu></blockquote><nav id="ocekk"><code id="ocekk"></code></nav><menu id="ocekk"></menu>
  • <xmp id="ocekk"><menu id="ocekk"></menu>
  • <xmp id="ocekk"><nav id="ocekk"></nav>
    <menu id="ocekk"></menu>
    Contact About US Home

    Tel:0577-85210258

    Chinese website

    Wenzhou Sugong Fluid Equipment Technology Co., Ltd.

    new productCurrent position:Homenew product

    SGK-SQ hand-air integrated aseptic sampling valve

    Date:[2019-01-15]     Click:

    application

      Sterile sampling valves are primarily used for material sample collection in tank equipment or piping and require sterilization prior to and after each sampling. No dead ends, complete sterilization, continuous sampling and sterile sampling at any time. Widely used in food, wine, beverage, dairy products, toothpaste cosmetics, bio-pharmaceutical and other industries.


    Technical Parameters

    ◆Specifications: DN8 DN15

    ◆Connection method: welding, clamp, thread

    ◆Maximum working pressure: ≤8bar

    ◆Maximum sterilization pressure: ≤3bar

    ◆Working temperature: -10 ° C to 120 ° C

    ◆Maximum sterilization temperature: 120~150°C

    ◆Contact with material: SS316L Other parts SS304

    ◆Internal surface contact product: Ra≤0.8μm

    ◆Sealing: EPDM/SI


    working principle


    This aseptic sampling valve is mainly divided into pneumatic components, handles, valve bodies, and diaphragm seals. When in the closed state, the valve core is pushed by the spring tension, and the sealing rubber head is pressed by the valve core to the inlet of the valve body material to achieve the sealing effect; if sampling is required, one of the sampling ports (usually the lower one) is passed through. Steam or other sterilizing medium, fill the entire sample chamber and export it from another sampling port. After a certain period of time, make the sample chamber and sampling port sterile; then shrink the spring by feeding air or lifting the handle. The valve core is loosened so that the sealing rubber head is detached from the inlet of the valve body material, so that the sample flows out of the tank through the sample chamber and is collected from the sampling port; after sampling, the gas source is closed or the handle is lowered, the spring is released, and the valve core is passed through the valve core. Press the sealant head again at the inlet of the valve body; pass the clean water to drain the residual liquid in the sample chamber (if the sample is a clean medium such as sterile water, this step can be omitted), then inject the sterilization medium. The seal is retained and will be sampled next time.


    Working principle diagram

             Sampling state diagram              Sterilization state diagram


    new product
    intelligent controller
    Aseptic Sampling Valve
    Cut-off reversing valve
    Single-seat two-seat anti-mixing valve
    Pressure Safety Automatic Control Valve
    Regulating valve
    bottom valve
    Sterile diaphragm valve
    pneumatic butterfly valve
    Alcohol Equipment Valve
    Sanitary pump
    Sight glass
    Filter
    High Clean Joint
    Wenzhou Sugong Fluid Equipment Technology Co., Ltd. Home

    |

    About US

    |

    News List

    |

    Product List COPYRIGHT ? 2018 Wenzhou Sugong Fluid Equipment Technology Co., Ltd.
    色www影院免费观看入口_特级牲交大片30分钟_国产人成午夜免电影费观看_邻居熟妇不戴套在线观看